National service hotline:

0769-38861158

current: 主页 > News >

support hotline

0769-38861158
What are the maintenance methods for plastic molds in precis

What are the maintenance methods for plastic molds in precis

Precise plastic molds should be regularly maintained during use. If the product is found to be defective, the wear condition of each part of the plastic mold should be checked. If it needs to be repaired, it should be repaired. If it needs...
Three classifications of precision plastic molds

Three classifications of precision plastic molds

Precision plastic molds are divided into: Dashuikou mold, fine nozzle mold, hot runner mold. 1, Dashuikou mold The flow channel and the gate are on the parting line, and the product is demolded together when the product is opened. The desig...
Introduction to 6 large plastic mold systems

Introduction to 6 large plastic mold systems

The plastic mold consists of two parts: a movable mold and a fixed mold. The movable mold is mounted on the moving template of the injection molding machine, and the fixed mold is mounted on the fixed template of the injection molding machi...
Common problem solving methods in the processing of precisio

Common problem solving methods in the processing of precisio

In the processing of precision plastic mold parts, we often see plastic products lacking material, resulting in stress cracks, smears, dents, silver streaks, deformation, cracks, mesh cracks, whitening, weld marks and other issues. And thes...
Common problems and processing procedures for precision plas

Common problems and processing procedures for precision plas

First, the common problems of precision plastic mold processing: 1, size, plastic materials have shrinkage, mold size should be multiplied by material shrinkage 2. The runner design should be reasonably balanced, and the exhaust should be d...
Plastic molds appear warpage, deformation causes and solutio

Plastic molds appear warpage, deformation causes and solutio

The plastic mold is an abbreviation for a combined mold for compression molding, extrusion molding, injection molding, blow molding and low foam molding. Plastic mold injection molding is a processing method used in mass production of compl...
Online Service